![]() |
|||||||||
|   |   |
![]()       Click Photo to Enlarge Home 8051 68HC11 68H908 68332 80C196 |
  |
AC-332 Analog Daughterboard Specifications   CP-332, CP-320, MP-11, and MP-196 Compatible   ADS7832BP 4-Channel, 12-Bit A/D Converter   DAC7801LP 2-Channel, 12-Bit D/A Converter   +5 Voltage Reference for A/D Converter   2 by .75 inch Prototyping Area   Passive or Active Signal Conditioning on Inputs   DAC Output Circuitry for Unipolar Operation   Terminal Connectors for Analog Hookup |
  | ||||
|   |   |   | |||||||
|   |   |
Overview The AC-332 is an optional analog daughterboard which provides A/D and D/A capability for the CP-320, CP-332, MP-11, and MP-196 single board computers. Daughterboard resources include an autocalibrating 4 channel, 12-bit A/D converter, and dual monolithic 12-bit multiplying D/A converter. The AC-332 measures 4.5 by 5.5 inches. A 40 pin male header on the board connects to a female counterpart on the target board. The AC-332 is mechanically secured to the target board with mounting hardware. Additional connectors on the AC-332 allow analog inputs, outputs and supply lines to be tied to the board. A/D Converter The board includes an ADS7832BP A/D converter. This is an autocalibrating, 4-channel, 12-bit A/D with internal sample/hold, and 8.5 usec conversion time. Circuitry for each analog input is provided on the board for either low or high source impedances. For low source impedances (< 5K Ohm), a passive low-pass filter is available. For high source impedances (>= 5K Ohm), the AC-332 contains circuitry which implements an active low-pass filter. D/A Converter A DAC7801LP D/A converter is available on the board. This is a dual monolithic CMOS 12-bit multiplying digital-to-analog converter. Each D/A converter has circuitry which configures it in a typical unipolar ( two-quadrant ) multiplying configuration with gain trim. Jumper options allow users to change the D/A output configuration. Prototyping Area A 2 by .75 inch prototyping area is available for adding custom user circuitry. This area contains 148 holes placed on a .1 inch grid. Power Requirements The AC-332 requires +5 Volts Digital (regulated) at 25 ma (maximum), +5 Volts Analog (regulated) at 25 ms (maximum), +12 Volts Analog (regulated) at 150 ma (maximum), and -12 Volts (regulated) at 150 ma (maximum). |
  | ||||||
|   |   |   | |||||||
|   |   | Quantity One Pricing: |   | ||||||
|   |   |
|
  | ||||||
|   |   |   | |||||||
|   |   |
Home |
Products |
Services |
Contact Us
|
  | ||||||
|   |   |
Copyright 2008 Allen Systems Last Updated on 1/5/2008 |
  | ||||||
|
|
|||||||||
|
|
|||||||||