Home		Serial Programming Option for the TIGER BYTE-51 Specifications   In-system Flash programming   Supports the 89S8252 or 89S53   Standard Programming Commands
		Overview Allen Systems' TIGER BYTE-51 board uses either the 89S8252 or 89S53 MCU with on-chip Flash. The 89S8252 has 8K bytes of FLASH, and 2K bytes of EEPROM. The 89S53 has 12K bytes of Flash and no EEPROM. An important feature of the 89S family is that the Flash and EEPROM are serially programmable. This option for the TIGER BYTE-51 board supports serial programming of either the 89S8252 or 89S53. It includes a cable which connects the parallel port on a host PC to a 10 pin header on the board. A 3.5 inch disk contains the necessary software. It contains two MS-DOS programs: an install utility, and the programming software. The install utility is used to specify details about the host PC. The programming software performs the programming operation.
		Programming Commands
		Blank Check   Modify Parameters   Compare   Program Device   Display/Change   Quit   Erase   Read Device   File LOAD/SAVE   Verify   Lock Bit Write
		Quantity One Pricing: The TIGER BYTE-51 board is priced at $79 with the 89S8252 installed, and $89 with an 89S53 installed. A "kit" is available which includes the TIGER BYTE-51 board, the programming cable, and MS-DOS disk with programming software. The TIGER BYTE-51 Kit with 89S8252 processor installed is $99. The TIGER BYTE-51 kit with 89S53 processor is $109.
		Home | Products | Services | Contact Us
		Copyright 2008 Allen Systems Last Updated on 1/5/2008