System Monitor for the MP-196
Specifications
80C196KC Compatible
Allows for development and debug of user software
Uses Serial Port A of board's DUART
The SM-196 System Monitor is an EPROM-based debugger for the MP-196 single board computer. It allows the user to download application object code into RAM on the board. Downloaded code is then tested using SM-196 commands.
In the typical development setup, a host computer (PC or compatible) is serially linked to the MP-196. The serial connection runs from a COM port on the PC to Serial Port A of the board's DUART. This preserves the 80C196 serial port for user application.
The SM-196 consumes under 6K bytes and is supplied on two 27C256 EPROMs. It comes with a User's Manual which contains a complete listing of the monitor source.
Examine and change memory
Examine and change PC, PSW, and SP
Trace execution until breakpoint
Trace one or more instructions
Execute code with optional breakpoint
Download user code into MP-196 RAM
Force break in execution
Set up to eight breakpoints
The SM-196 is priced at $29.
Last Updated on 1/5/2008
